Manualshelf

User's Manual

ManualsBrandsWG Security Products ManualsElectronicsLane Guard BTL
11121314151617181920
Common Platform EAS Systems
12
Fuse Replacement Information (on BTL socket Board)
The fuse holder is accessed through the socket board side of pedestal.
1. Equipment shall be electrically disconnected from
the main circuit supply when replacing the fuse.
2. Remove the fuse holder with a screwdriver,
rotating it in a counterclockwise direction.
3. Replace the fuse in accordance with the
specification noted above.
WARNING – TO REDUCE THE RISK OF DAMAGE; REPLACE ONLY WITH
THE SAME FUSE TYPE AND RATING.
Fuse Replacement:
5mm x 20mm
3.15A (Fast Fuse)