User's Manual

Pro-Guard & Uni-Guard Installation Manual
25
Key ID C: Receiving Window Delay
(Range: 0-15; increment: 1)
You can input a number from 1-15. The larger the number, the later the receiving window will
be opened.
• Press [RE] – panel displays as per Figure 5.
• Input the parameter number.
• Press [CON] to accept the parameter.
Figure 5.
Key ID D: Noise Condition Display (Range: 0-2)
The LEDs indicate the signal level by value figures. The upper value reflects the nose level
from antenna channel 1; the lower value reflects the noise level from antenna channel 2.
Note: If the noise condition display is open, the alarm will be deactivated unless you
input 0 to shut down the display.
• Press [NSE] – panel displays as per Figure 6.1.
• Input the parameter number.
• Press [CON] to accept the parameter – panel displays as per Figure 6.2.
Figure 6.1
Figure 6.2
CH 1
CH 2