User's Manual

Pro-Guard & Uni-Guard Installation Manual

Fuse Replacement Information

The fuse holder is located at the bottom PC board in the pedestal.

1. Equipment shall be electrically

disconnected from the branch-

circuit supply when replacing the

fuse.

2. Remove the fuse holder with a

screwdriver, rotating it in a

counterclockwise direction.

3. Replace the fuse in accordance

with the specification noted

below.

Counterclockwise

Fuse Replacement:

Extended Fuse (Time-Delay Fuse)

5mm x 20mm 5A

WARNING

–

TO REDUCE THE RISK OF DAMAGE, REPLACE ONLY WITH

THE SAME FUSE TYPE AND RATING.