Manualshelf

User's Manual

ManualsBrandsWG Security Products ManualsElectronicsEAS System
11121314151617181920
Pro-Guard & Uni-Guard Installation Manual
13
Insert the inflationary spirals into the holes.
Set the base in place, allowing the spiral heads to go through the holes in the base.
Place cushion rings, then spring rings and nuts on the spiral heads, and screw the nuts to fix
the base to the ground.
Lift the gate bottom and mount the 3-pin power line plug onto the power socket (J6) on the
bottom of the PC board as shown in the following picture (note red circle around the socket).
Pro-Guard Transmitter – Bottom View
Pro-Guard Transmitter – Bottom View