Installation & Assembly
8
Instruction Guide
Repeat
Repeat steps 4 through 6 for remaining cabinets.
Use clamps and 1 ¼˝ screws as needed to
fasten the cabinets to each other. Conrm the t
of tops as you install all the cabinets.
Attach with 3 ½˝ screws
Using a square drive tip, attach the cabinet to the
wood studs using 3 ½˝ screws. Install screws into
every stud.
Transfer stud locations
Inside cabinet, mark stud locations on cleats (a)
at top and bottom of cabinet (a) and drill ⁄˝ pilot
hole into center of cleats only (b). DO NOT DRILL
PILOT HOLE INTO WALL.
7
5 6
FLOORLINE
Component Installation
Now that your cabinets have been assembled
and installed, you can begin installing your garage
components – any drawers, doors, or other items
that are unique to your garage storage solution.
6
a)
a)
b)
b)