Assembly & Operating Instructions

ManualsBrandsWFX Utility ManualsGarage & Tool StorageTricia 54'' H x 32'' W Multi-Use Truck Rack

READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT.

This manual provides important information on proper operation and maintenance. Every effort has been

made to ensure the accuracy of this manual. We reserve the right to change this product at any time without

prior notice.

Multi-Use Truck Rack

Assembly & Operating Instructions

STOP! DO NOT RETURN THIS PRODUCT.

Questions? Problems? CONTACT CUSTOMER SERVICE

If you experience a problem or need parts for this product, visit our website

or call

our customer help. A copy

of the salesreceipt is required.

Summary of content (4 pages)

PAGE 1
Multi-Use Truck Rack Assembly & Operating Instructions READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT. This manual provides important information on proper operation and maintenance. Every effort has been made to ensure the accuracy of this manual. We reserve the right to change this product at any time without prior notice. STOP! DO NOT RETURN THIS PRODUCT. Questions? Problems? CONTACT CUSTOMER SERVICE.
PAGE 2
Multi-Use Truck Rack Assembly and Operating Instructions Verify that you have received the hardware and parts in the correct quantities as shown below and on the following page. Hardware Parts 3 C A Allen Head Set Screw 3/8" x 1/2" Hex Bolt 3/8" x 1 3/4" D Flat Washer 3/8" SAE 1 E Lock Washer 3/8" 4 2 J F Hex Nut 3/8" G Button Head Bolt 5/16" x 2 1/4" 6 K Lock Nut 5/16" Flat Washer 5/16" L M 5 H Button Head Bolt 5/16" x 3 1/2" Backing Plate 7 8 Spacer Hardware List Item No.
PAGE 3
Do not exceed 250 lb. weight capacity distributed evenly across both frames. Be aware of dynamic loading! Load movement could cause excess load, causing product failure. Strap ladder securely to rack. When expanding the Arm, leave approximately 2.5” of the tube in the frame. L 2 Choose the left or right side to mount the Multi-Use Truck Rack.
PAGE 4
Step 5 With the Upright Support inserted, attach the Rear Upright Support Bracket using 2 bolts (A), 2 washers (D), 2 lock washers (E), and 2 nuts (F). With the foot of the Upright Support (6) plumb, mark and drill two holes in the truck bed. Attach the foot to the truck bed using 2 bolts (A), 2 washers (D), 2 lock washers (E), and 2 nuts (F). 8 Adjustable Arm Step 6 Assemble the upper arm (FIG 4) using button head bolts (G), flat washers (K) and lock nuts (J).