Installation & Assembly

step 12.

(V) x 2

Screw Ø5 X 50mm

(Hh) x 2

Wall anchor

1. Mark the screw hole in the wall according to the product height.

2. Drill the hole in the wall using drill Ø8.

3. Knock the wall anchor (Hh) into the hole.

4. Attach the screw (V) to the wall anchor (Hh) through the product screw hole.

Notice: You could adjust the adjustable leg if the floor is not flat.

If you purchase 24201 24" Counter top meanwhile, please refer to

the manual 24201 24" Counter top;

If you purchase 24200 71“ Counter top meanwhile, please refer to

the manual 24200 71“ Counter top;

If you purchase 24202 Two door base cabinet meanwhile,

please refer to the manual 24202 Two door base cabinet

Step 12 - Step 15 for assembly .

If you just only purchase this sku, please proceed with

below steps to finish the assembly.