Installation & Assembly

9.
Before tightening the bolt, measure from the wall or from the end of the
support rail and move the slide rail so that both ends are perpendicular to
the support rails. Tighten the bolts to secure the slide rail in place. Be
cautious that you don’t bend or distort the slide rail when tightening.
10. Be
fore mounting your second slide rail, determine how far apart the slide
rails should be by measuring your tote at the position shown, just below
the lip.
11. No
w mount your second slide rail using the same method you did for the
first. Using the measurement from your tote, position your second rail the
correct distance from your first slide rail.
Me
asure the distance between the first and second slide rails at each end and
adjust the slide rail to the correct measurement. Tighten down both bolts, again
making that you don’t bend or distort the slide rail when tightening.