Operator Manual For use with WFCO ULTRA III Power Center Model WF-8712P and WF-8725P TM Distributed in the U.S.A. and Canada by Arterra Distribution Sales (574) 294-8997 Warranty Service (877) 294-8997 Fax (574) 294-8698 www.wfcoelectronics.
General Consumer Information TM TM Reverse Battery Protection This feature prevents permanent damage to the converter from an incorrect battery connection. DC Fuses - Four 12 Vdc circuits (including one battery circuit) - Maximum of 25 Adc fuse for DC circuits 1 through 4 - Reverse battery protection fuse: replace only with ATC “Littelfuse®” Type 257 fuse Circuit Breakers - One 30 Aac “Main circuit” and max.
TM TM Troubleshooting F2 F3 3 4 BREAKER +VCC F4 ON OFF WF-8712(8725) 2 1 F1 BATTERY CIRCUIT, RED WIRE FUSE ATC style “Littelfuse®” Type 257 fuse (Figure. 3) IMPORTANT: If the reverse polarity fuse is blown, it means the RV battery was accidentally connected in reverse, either at the battery or at the converter. Connect the battery properly and then replace with ATC “Littelfuse®“ Type 257 fuse.
TM TM WFCO extends to the original owner a Two-Year Limited Product Warranty. This Warranty is in effect from the date of original purchase for a period of two (2) years. This Limited Warranty is extended specifically for and is limited to recreational vehicle application and is valid only within the continental United States, Alaska, Hawaii and the provinces of Canada.
TM CHASSIS GROUND WIRE AC GROUND TERMINAL BAR GREEN WIRE (FROM CONVERTER) HOT WIRE WHITE WIRE (FROM CONVERTER) NEUTRAL WIRE MAIN BREAKER RETAINING CLIP TO MAIN BREAKER HOLD DOWN MAIN BREAKER 1.97? BLACK WIRE (FROM CONVERTER) BATTERY CIRCUIT RED WIRE 1 2 BLACK WIRE (TO AC SHORE - HOT) ON 30 3 8.07? 4 15 OFF AC NEUTRAL TERMINAL BAR FUSE REVERSE BATTERY PROTECTION FUSE AVAILABLE FOR BRANCH CIRCUIT PIGTAIL TO BRANCH CIRCUIT CONNECTED TO 1.
TM TM OEM Installation of the WFCO WF-8712 and WF-8725 Power Center CAUTION ! To prevent fire, do not cover or obstruct ventilation openings. Do not mount in zero-clearance compartment. Overheating may result. For continued protection against risk of fire, or electric shock replace only with same type and ratings of fuse. The fuse rating that the manufacturer suggests for the output fuses will be marked on the unit. Replace only with same type and rating.
