Use and Care Manual

- 6 -
• Remove all the protective films (both on the front and on the back)
before using.
• Be sure the input voltage is between 120V, 60Hz.
• Do not use the device in potentially explosive rooms.
• Set the device up in an upright and stable position.
• Let the device dry out after a wet clean. Do not operate it
when wet.
• Do not use the device with wet or damp hands.
• Do not expose the device directly to squirting water.
• Never insert any objects or limbs into the device.
• Do not cover the device during operation.
• Do not sit on the device.
• This appliance is not a toy! Keep away from children and animals. Do
not leave the device unattended during operation.
• Check accessories and connection parts for possible damage prior to
every use of the device. Do not use any defective devices or device
parts.
• Ensure that all electric cables outside of the device are protected from
damage (e.g. caused by animals). Never use the device if electric cables
or the power connection are damaged!