Manualshelf

Use and Care Manual

ManualsBrandsWexstar ManualsHeater AccessoriesHang Ceiling Installation Kit for Frameless Infrared Panel Heater. It drops the panel up to 40 inches from the ceiling.
11121314151617181920
- 14 -
3. Insert the screws into the anchors and fasten the screws. The
screws should protrude approx. 0.5 cm / 0.2” from the dowels.
4. Hang the infrared heating device (A) in.
5. Slid the device to make the screws into the correct positions as
showing in below drawing.
6. Plug in to start using the heating device.
Do pull out the plug when not in use.