Use and Care Manual

- 13 -
6┃INSTALLATION
Make sure remove all the protective films (both on the front and
back)!
Instruction for Wall Mounting
IMPORTANT: this way is for wall mounting only!
1. Choose the mounting position, keep the required minimum
distances.
Distances required for device mounting
front
Minimum 30cm / 12”
left
Minimum 10cm / 4”
right
Minimum 10cm / 4”
top
Minimum 50cm /20”
2. Mark the positions for the bore holes onto the drilling template (D)
if there are no existing marks. Stick the drilling template on the wall.
Drill the holes with an 8mm drill bit.