2100 SRE

12 | English
1 619 P13 620 | (18.11.15) Bosch Power Tools
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working
period.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organisation of work pat-
terns.
Mounting and Operation
The following table indicates the action objectives for mounting and operation of the power tool. The instructions for each action
objective are shown aside. Depending on the type of application, various instruction combinations are required. Observe the
safety instructions.
Action Figure Please observe Page
Inserting SDS-plus Drilling Tools
1 81
Removing SDS-plus Drilling Tools
2 81
Inserting the Key Type Drill Chuck
(PBH 2100 SRE, PBH 2500 SRE)
3 82
Inserting the Keyless Chuck
(PBH 2500 SRE)
*Not available in all countries.
*
4 82
Selecting the operating mode and
rotation direction
5 83–84
Changing the chisel position
(Vario-Lock)
6 84
Changing the position of the
auxiliary handle
7 84
OBJ_BUCH-1576-005.book Page 12 Wednesday, November 18, 2015 3:50 PM