Installation Instructions
CARE AND MAINTENANCE
pg. 8
CARE AND MAINTENANCE
Wetwall Installation
INSTALLATION CLEANUP
• Remove all construction debris. Tile grout can be removed with a wooden popsicle stick or tongue depressor.
Do not use wire brushes or any other metal implement on surface.
• Post installation clean-up generally can be completed using warm water and liquid dishwashing detergent.
Stubborn dirt or stains may be removed by using regular household cleaners and/or denatured alcohol.
• Denatured alcohol or acetone can be used to remove excess adhesive and/or wet oil-base paint. Be sure to
rinse with soap and water immediately after.
CARE AND MAINTENANCE
WARNING: Cleaning products with labels that say “not suitable for use with ABS, acrylic or
polystyrene” SHOULD NOT BE USED. Read all labels carefully.
• Excessively hot water (greater than 212 degrees) may cause surface damage.
• HARSH CHEMICALS SHOULD NEVER BE USED ON WETWALL SURFACES. Clean after use with a
mild liquid household detergent cleaner. Do not use Lestoil®, Lysol® Disinfectant (spray or concentrate),
or Lysol® Basin, Tub and Tile Cleaner, Mr. Clean®, Dow® Disinfectant Bathroom Cleaner, or cleaning
products in aerosol cans.
• Do not use wire brushes, knives or sharp objects to remove stains, cigarette tar deposits, or other surface
blemishes.
• Abrasive cleaners or powders must not be used, since they will dull the surface.
• Do not wax areas where you walk or stand.
• Do not allow nail polish remover, dry cleaning fluid, paint remover or other solvents to come into contact
with the surface. For stubborn stains acetone can be used in moderation. Be sure to wash surface
immediately after with soap and water.
• Clean the surrounding surface immediately after using caustic drain cleaners.
• Burning cigarettes will damage the surface.
• Should damage to the panels occur, repairs can be made quickly and easily. Your distributor or builder can
provide details.
For additional information:
Wetwall Technical Data
Wetwall Warranty
Wetwall Website