Installation Instructions

WETWALL COLOR MATCHED SEALANT APPLICATION
COLOR MATCHED SEALANT APPLICATION
Wetwall Installation
Applying Color Matched Sealant For Seams and Joints
NOTE: Color matched sealant is colored or matched to the approximate color of panel being
installed. This helps ensure sealant is not as visible.
STEP 1.
• Once all panels are securely in place and set, apply the color matched sealant to all corners,
seams between panels and gaps between bottom panels and tub or shower pan.( See
Illustration 7 )
NOTE: Wipe any excess adhesive from the panel with denatured alcohol .
STEP 2.
• Allow panels to cure for 24 hours before installation of shower accessories.
Illustration 7
pg. 6