Installation Instructions

ACCESSORY INSTALLATION

Wetwall Installation

Installing Shower Heads, Handles, and Bath Spouts

STEP 1.

• Install the shower accessories per the manufacturer’s instructions. Be sure to apply color

matched sealant to all trim plates.

NOTE: Allow 24 hours for the color matched sealant to dry before use.

Installing Shower Shelves, Doors and Curtain Rods

FOLLOW MANUFACTURER’S INSTRUCTIONS.

IMPORTANT: Apply color matched sealant over the threads of mounting screws AND around

outside of each wall anchor to seal out moisture and water. The shelf/shelves must be supported

to the wall behind the Wetwall panel. Wetwall itself must not support the weight of the shelf/

shelves.

pg. 7