Owner Manual

CLEANING GUIDE
All WETSTYLE products are manufactured with WETMAR BiO™, an ultra-smooth,
non-porous material that helps keep grime and calcium deposits in check.
Le WETMAR BiO™ is ultra-easy to clean: after each use, simply wipe with a soft
cloth to remove any surface dirt.
For standard cleaning of both True High Gloss™ and matte finishes, we
recommend using widely available cleaning products such as Mr. Clean,
Fantastik, CIF, etc.The matte finish may occasionally require a mildly abrasive
product.
Never use petroleum-based products when cleaning, i.e. paint thinners or other
solvents, as they may damage the WETMAR BiO™ surface. (Note: Personal
hygiene products and cosmetics will NOT damage the surface.)
Standard Cleaning
WETMAR BiO™, True High Gloss™
Wipe surface with a soft cloth after each use.
Use a mild cleaning product such as Mr. Clean, Fantastik, CIF, etc.
Do not use abrasive products or cream cleansers.
WETMAR BiO™, matte finish
Wipe surface with a soft cloth after each use.
Use a mild cleaning product such as Mr. Clean, Fantastik, CIF, etc.
For more diffi cult stains, use a mildly abrasive cream cleanser such as Soft
Scrub, Comet Soft Cleanser, Cream with Bleach or CIF.
Scratched or Damaged Surfaces
To repair scratched or damaged surfaces, sand the area using 600-, 800- and
1200-grit sandpaper: begin with the lower number (coarser) grit followed
with each higher number (finer) grit in ascending order. Finish by polishing
the surface using a cloth and white polishing compound for automobiles.
Repairs
For more extensive repairs, send a photograph of your WETSTYLE product to
our Customer Service Department ([e-mail]), who will inform you
as to the most appropriate methods to use..
www.WETSTYLE.CA - Montreal - Canada
Tel. [phone] - Fax. [phone]
CLEANING GUIDE