Installation & Assembly

WETSTYLE
Installation guide
march 2016
6
CLEANINGGUIDE
All WETSTYLE products are manufactured with WETMAR BiO™; an ultra-smooth, non-porous material
that helps keep grime and calcium deposits in check.
WETMAR BiO™ is ultra-easy to clean: after each use, simply wipe with a soft cloth to remove any sur-
face dirt.
For standard cleaning of both glossy and matte finishes, we recommend using widely available clea-
ning products such as Mr. Clean, Fantastik, CIF, etc. The matte finish may occasionally require a mildly
abrasive product.
Never use petroleum-based products when cleaning, i.e. paint thinners or other solvents, as they
may damage the WETMAR BiO™ surface. (Note: Personal hygiene products and cosmetics will NOT
damage the surface.)
Standard Cleaning
WETMAR BiO™, True High Gloss™
Wipe surface with a soft cloth after each use.
Use a mild cleaning product such as Mr. Clean, Fantastik, CIF, etc.
Do not use abrasive products or cream cleansers.
WETMAR BiO™, matte finish
Wipe surface with a soft cloth after each use.
Use a mild cleaning product such as Mr. Clean, Fantastik, CIF, etc.
For more difficult stains, use a mildly abrasive cream cleanser such
as Soft Scrub, Comet Soft Cleanser, Cream with Bleach or CIF.
Scratched Or Damaged Surfaces
To repair scratched or damaged surfaces, sand the area using 600-, 800- and 1200-grit sandpaper,
beginning with the lower number (coarser) grit and then following with the higher number (finer) grit
in ascending order. Finish by polishing the surface using a cloth and white polishing compound for
automobiles.
Repairs
For more extensive repairs, send a photograph of your WETSTYLE product to our Customer Service De-
partment ([e-mail]), who will inform you as to the most appropriate methods to use.