Installation & Assembly

WETSTYLE
Installation guide
march 2016
5
Figure 1
Sink inner dimensions
Figure 2
Size of the opening
Figure 3
Sectional views
UNDER-COUNTERVESSELSINK
1. Install the basic plumbing components: water inlet and drain.
2. Determine the size of your opening based on the sink chosen. For example, a sink with inside
dimensions of 19-3/4 " x 13 " (Figure 1), will require a counter opening of 19-1/2 " x 12-3/4 "
(Figures 2 and 3), i.e. 1/4 " less in both depth and length.
VC 821
3. Install the sink drain. Read the manufacturer’s instructions to ensure you are installing the equipment
as you should. Before the final installation phases, check that all connections are waterproof.
4. To fix the sink underneath the counter:
 • Covertheatrimofthesinkwithasiliconesealer.
(Figure 4)
 • Placethesinkunderneaththecounterandpress
up to ensure there is a good adhesion between
the 2 surfaces that are touching. (Figure 5)
 • Propupthesinkwithasticktomaintainpressure
until such time as the silicone sealer has set.
 • Removetheexcesssealer.
5. Connect all of the final plumbing. Hook up the water to the valving.
Figure 4
Figure 5
counter
silicone
vessel sink