Installation & Assembly

WETSTYLE
Installation guide
march 2016
3
ABOVE-COUNTERLAVATORY (VC, VCM and VOV – 4 “ height) and
SEMI-RECESSEDLAVATORY (VCS, VCMS and VOVS – 2 “ height)
IMPORTANT:Ifinstallinglavatoryonthirdpartyfurniture(nonWETSTYLEvanities)
Please be advised that when installing WETSTYLE Lavatories on furniture that is not Wetstyle, an
adequate support or bracing must be applied otherwise there is a risk of bowing or sagging.
WETSTYLE does not take responsibility for the use of third party furniture in conjunction
with WETSTYLE Lavatories. Installation of these counter top sinks without adequate support
underneath will void warranty.
Vanity opening: Interior
dimension of sink + 1’’.
(Applicable both width
and length)
Silicone sealant
Support or bracing as to
counter bowing
Figure #1 (Tracing the opening for sink bowl)
Figure #3 (Risk of bowing)
Figure #2 (Placing the lavatory)
Figure #4 (Adding support)
CAUTION
LAVATORY must be evenly
supported on all four sides
to avoid sagging.
Lavatory must be supported on all
four sides and reinforced on the front.
Improper installation as depicted in this
warning will void the warranty