Owner's Manual

WET SOUNDS

BLUETOOTH SOUND CONTROLLER WW-BT RS

BLUETOOTH PAIRING INSTRUCTIONS:

STEP 1: Turn on WW-BT-RS by pressing the power

switch (1), which will be

backlit RED momentarily, then WHITE constantly to indicate that the WW-BT-RS is

ready to use.

STEP 2: If not already paired with another learned device, the WW-BT-RS will

automatically enter pairing mode, which is indicated by the backlight ﬂashing RED.

STEP 3: From your phone’s Bluetooth pairing menu ﬁnd the WW-BT-RS and connect

to it.

You are now paired to the WW-BT-RS and will automatically default

to this device if in range whenever the WW-BT-RS is powered on.

MOUNTING INSTRUCTIONS:

The WW-BT-RS is designed to snap into a standard Carling style switch opening,

which is commonly used in the dashboard of many automobiles and off-road vehicles.

WIRING INSTALLATION INSTRUCTIONS:

RED WIRE Connect to +12V for Power

BLUE WIRE Connect to Ampliﬁer Remote Wire

To turn on amp when the BT-RS is Powered on.

BLACK WIRE Connect to -12V for Ground

MAIN OUTPUT Connect to input of an ampliﬁer

AUX INPUT Connect to an optional auxiliary source other than

Bluetooth

THANK YOU FOR CHOOSING WET SOUNDS

FOR YOUR HIGH PERFORMANCE AUDIO

SYSTEM!

The WW-BT-RS is an easy to operate Bluetooth

Source Controller.

Designed to mount in a standard Carling style

opening, the BT-RS controls all Bluetooth

functions as well as the system volume!