WS-MC-5 V2 1 piece marine receiver Owner’s Manual
Congratulations! Thank you for purchasing the Wet Sounds WS-MC-5 V2 1 piece marine receiver. Wet Sounds products represent the ultimate in high performance audio. Wet Sounds products are specifically engineered to withstand rigorous marine environments.
Table of Content Please take a moment to look over this instruction manual before enjoying the product. Installation Specifications 1 Features 3 Controls 4 Setup 5 Source 7 Warranty 8 Manual details are subject to change over time. Please visit wetsounds.com for the latest updates to this manual.
Installation Specifications Product Dimensions 5.1” (129 mm) 2.9” (73 mm) 4.1” (105 mm) 3.1” (80 mm) 1.
Wiring Harness Diagram for WS-MC-5 V2: 1.Remote 2.Front line out 3.Rear line out 4.Zone 2 out tower/subs 5. Aux input 6. Radio Ant. Wire Diagram for Connector A 20A Wire Connector A: Pin No. Wire Color Wire Definition Pin No.
Features Features Included • • • • • • • • AM & FM Bluetooth Streaming, Auxiliary, Simple & Secure Bluetooth Pairing for Android & IOS (A2DP/AVRCP 1.4) 2.
WS-MC-5 V2 Controls Controls allow you to navigate and access MC-5 V2 features. 2 9 3 10 1 4 11 navigate select 1 5 6 7 8 1. Main Control Knob (MCK): This allows adjustment of main volume, as well as making selections when the SETUP and MENU features are being used. Rotate the MCK to highlight a feature, then depress the MCK to select the highlighted feature. 2. Power/Mute: Press and hold this button for power On/Off. Short press this button to mute/unmute the volume of all zones.
Setup Menu Allows access to controls that affect all functions of the MC-5 V2. Rotate the MCK until the desired function is highlighted, then depress the MCK for access. The functions available are: Audio Allows access to the following audio adjustments: Balance/ Fader: Allows adjustment of the Balance (Left/Right) and Fader (Front Rear) of the main outputs – both powered & pre-amp. Rotate the MCK to highlight the desired function, depress the MCK then rotate the MCK to adjust the function.
Day/ Night Mode Allows the ability to scroll through the display options of Day (white screen/black characters), Night (black screen/ white characters), or Auto. In Auto mode, the display is in Day mode until the vehicle’s lights are turned on, then the display goes into Night mode. Note – In order for the Auto function to operate properly, the Orange wire in the MC-5 V2 harness labeled Dim Input must be wired to a circuit in the vehicle that gets +12V whenever the main lighting switch is turned on.
Source (SRC) Allows access to three different sources: Radio Operation 1. Press SRC, then select the symbol to access the Radio. 2. To select between FM1/FM2/FM3/AM1/AM2, press the BAND button (#10). 3. Short Press the tunner seek up/down buttons (#7/#8) to automatically seek the next strongest station either up or down. 4. Long press the same buttons to Manually Tune either up or down.
FCC Compliance Statment This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions. 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
WS-MC-5 V2 877-938-7757 www.wetsounds.
