SDS

ManualsBrandsWestpac Materials ManualsBuilding materials3.5 Gal. Ready-Tex Pre-Mixed Wall and Ceiling Texture

Ready Texture

Safety Data Sheet*

Date of issue: 07/01/2015

Revision date: 07/01/2015

Supersedes: 10/15/2012

Version: 1.0

*According to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations Page 1 of 8

SECTION 1: Identification of the substance/mixture and of the company/undertaking

1.1. Product identifier

Product form

Mixture

Product name

Ready Texture

Quick Identifier

Common Name (on label / list)

Packaging

Product Code

Ready Texture (#2499)

3.5 gal (13.3 L) box

000516142102

Ready Texture

3.5 gal (13.3 L) pail

000516556206

1.2. Relevant identified uses of the substance or mixture and uses advised against

Use of the substance/mixture

Ready-Mixed Wall Texture

1.3. Details of the supplier of the safety data sheet

Westpac Materials

341 West Meats Avenue

Orange, CA, USA 92865

Phone number:

Fax number:

Website:

1-866-974-6837

1-714-637-9033

www.westpac.bz

1.4. Emergency telephone number

Emergency number

Chemtrec: 1-800-424-9300

SECTION 2: Hazards identification

2.1. Classification of the substance

Classification (GHS-US)

Carc. 1A

H350

STOT RE 2

H373

Full text of H-phrases: see section 16

2.2. Label elements

GHS-US labeling

Hazard pictograms (GHS-US)

GHS08

Signal word (GHS-US)

Danger

Hazard statements (GHS-US)

H350 - May cause cancer (Inhalation)

H373 - May cause damage to organs (lungs/respiratory system) through prolonged or repeated exposure

(Inhalation)

Precautionary statements (GHS-US)

P201 - Obtain special instructions before use

P202 - Do not handle until all safety precautions have been read and understood

P260 - Do not breathe dust, mist, spray, vapor

P280 - Wear appropriate PPE (See Section 8)

P308 + P313 - If exposed or concerned: Get medical advice/attention

P314 - Get medical advice/attention if you feel unwell

P405 - Store locked up

P501 - Dispose of contents/container to comply with local/regional/national/international regulations

2.3. Other hazards

Other hazards not contributing to the

classification

Traces of formaldehyde and vinyl acetate monomer may be present. These materials are not added to

this product. They may be present as residual trace chemicals in some commonly used raw materials.

Any exposure to these chemicals during product use is expected to remain well below both ACGIH and

OSHA limits. Other ingredients may be considered nuisance dusts regulated as Particulates Otherwise

Not Regulated.

Summary of content (8 pages)

PAGE 1
Ready Texture Safety Data Sheet* Date of issue: 07/01/2015 Revision date: 07/01/2015 Supersedes: 10/15/2012 Version: 1.0 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form Product name : : Mixture Ready Texture Quick Identifier Common Name (on label / list) Ready Texture (#2499) Packaging Product Code 3.5 gal (13.3 L) box 000516142102 Ready Texture 3.5 gal (13.3 L) pail 000516556206 1.2.
PAGE 2
Ready Texture Safety Data Sheet* Date of issue: 07/01/2015 : Revision date: 07/01/2015 Supersedes: 10/15/2012 Version: 1.0 Other constituents in this product are considered nuisance particles or dust. Exposure to dusts, mists, sprays or powders may cause mechanical irritation of the respiratory system, eyes, and skin. Particulates Not Otherwise Regulated (Respirable Fraction) has an OSHA PEL of 5 mg/m 3 (15 mppcf) TWA and ACGIH Guideline of 3 mg/m3 TWA.
PAGE 3
Ready Texture Safety Data Sheet* Date of issue: 07/01/2015 Revision date: 07/01/2015 Supersedes: 10/15/2012 Version: 1.0 SECTION 5: Firefighting measures 5.1. Extinguishing media Suitable extinguishing media : Any. Use media appropriate for surrounding fire. 5.2. Special hazards arising from the substance or mixture Fire hazard Reactivity : : Not flammable. Not reactive under normal use and conditions.
PAGE 4
Ready Texture Safety Data Sheet* Date of issue: 07/01/2015 Revision date: 07/01/2015 Supersedes: 10/15/2012 Version: 1.0 7.3. Specific end use(s) Ready-Mixed Wall Texture SECTION 8: Exposure controls/personal protection 8.1. Control parameters Crystalline Silica (14808-60-7) USA – ACGIH USA – ACGIH USA – OSHA USA – OSHA USA – OSHA ACGIH TWA (mg/m³) Remark (ACGIH) OSHA PEL (TWA) (mg/m³) OSHA PEL (TWA) (ppm) Remark (US OSHA) 0.
PAGE 5
Ready Texture Safety Data Sheet* Date of issue: 07/01/2015 Explosive properties Oxidizing properties Explosive limits : : : Revision date: 07/01/2015 Supersedes: 10/15/2012 Version: 1.0 No data available No data available No data available 9.2. Other information VOC content (VOC of material) VOC content for the South Coast Air Quality Management District (SCAQMD) – Regulatory VOC (less water and exempts) : : < 3 g/L Not applicable SECTION 10: Stability and reactivity 10.1.
PAGE 6
Ready Texture Safety Data Sheet* Date of issue: 07/01/2015 Revision date: 07/01/2015 Supersedes: 10/15/2012 Version: 1.0 formation, blurred vision, and light sensitivity. Symptoms/injuries after ingestion Chronic symptoms : : Practically non-toxic. Ingestion is not anticipated under normal working conditions. Repeated inhalation of respirable crystalline silica over a number of years can cause lung disease (silicosis) and increase the risks of developing respiratory cancer.
PAGE 7
Ready Texture Safety Data Sheet* Date of issue: 07/01/2015 15.2. Revision date: 07/01/2015 Supersedes: 10/15/2012 Version: 1.0 International regulations CANADA No additional information available. EU - Regulations No additional information available. Classification according to Regulations (EC) No. 1272/2008 [CLP] Classification according to Directive 67/548/EEC [DSD] or 1999/45/EC [DPD] Carc. Cat. 2; R22; R43; R49 Full text of R-phrases: see section 16 15.2.2.
PAGE 8
Ready Texture Safety Data Sheet* Date of issue: 07/01/2015 Revision date: 07/01/2015 Supersedes: 10/15/2012 Skin Sens.