Use and Care Guide
ENGLISH INSTRUCTIONS
4
16. Be sure the grinder is on a stable
work surface. Be sure all the
grinder feet are stable.
17. Do not let cord come in contact
with a hot surface. Do not
use on a hot surface. Check
if the voltage indicated on the
appliance corresponds to the
local voltage before you connect
the appliance.
18. Do not run grinder without meat
in the head. Severe damage to
the head and auger may occur.
19. Wear eye protection. Wear safety
glasses. Everyday eyeglasses
are not safety glasses. Safety
glasses conform to ANSI Z87.1
requirements.
NOTE: Approved safety glasses
have Z87 printed or stamped on
them.
20. Do not use outdoors.
21. Do not use appliance for other
than intended purpose.
22. Do not let cord hang over edge
of table or counter or touch hot
surfaces, including stove.
23. Do not attempt to operate the grinder
if the grinder itself is cold. The grinder
temperature should be at least 45
o
F
(7
o
C) before beginning.
24. The gear housing and the motor
cover may become hot during
operation. This is normal. Do not
touch these parts during operation or
until they cool after use.
25. WARNING: Busted, splintered bones
can get into the digestive tract of a
pet and cause severe damage, even
death by puncturing the walls of the
intestines or even the stomach.
26. This meat grinder is capable of
grinding smaller, softer animal bones
such as rabbit, whole chickens or
chicken quarters, and other birds,
due to both the power and all-metal
construction of the units.
27. Avoid grinding large, dense animal
bones as they are very difcult to
process (i.e., bones one would nd in
large game, pigs, or cows).
28. Grinding knife is sharp. Handle
carefully.
SAVE THESE INSTRUCTIONS