Use and Care Guide

ENGLISH INSTRUCTIONS
4
work surface. Be sure all the
grinder feet are stable.
18. Do not place on or near a hot
gas or electric burner, or in a
heated oven.
19. Do not run grinder without meat
in the head. Severe damage to
the head and auger may occur.
20. Wear eye protection. Wear safety
glasses. Everyday eyeglasses
are not safety glasses. Safety
glasses conform to ANSI Z87.1
requirements.
NOTE: Approved safety glasses
have Z87 printed or stamped on
them.
21. Do not use outdoors.
22. Do not use appliance for other
than intended purpose.
23. Do not let cord hang over edge
of table or counter or touch hot
surfaces, including stove.
24. Do not attempt to operate the
grinder if the grinder itself is cold.
The grinder temperature should
be at least 45
o
F (7
o
C) before
beginning.
25. The gear housing and the motor
cover may become hot during
operation. This is normal. Do
not touch these parts during
operation or until they cool after
use.
26. WARNING: Busted, splintered
bones can get into the digestive
tract of a pet and cause severe
damage, even death by puncturing
the walls of the intestines or even the
stomach.
27. This meat grinder is capable of
grinding smaller, softer animal bones
such as rabbit, whole chickens or
chicken quarters, and other birds,
due to both the power and all-metal
construction of the units.
28. Avoid grinding large, dense animal
bones as they are very di󰀩cult to
process (i.e., bones one would nd in
large game, pigs, or cows).
29. Grinding knife is sharp. Handle
carefully.
30. CAUTION! In order to avoid a hazard
due to inadvertent resetting of the
thermal cut-out, this appliance must
not be supplied through an external
switching device, such as a timer, or
connected to a circuit that is regularly
switched on.
SAVE THESE INSTRUCTIONS