Use and Care Guide
-6-
4. Position the Top Housing onto the
Lower Housing and line up the screw
holes.
5. Secure the Top Housing to
the Lower Housing using the 2
Housing Thumbscrews. DO NOT
OVERTIGHTEN! (Figure C).
6. Insert the Left Comb and Right Comb
into the Top Hosing (Figure C).
NOTE: The Left Comb is marked with
an “L” on the upper portion of the
Comb. The Top Housing is marked with
an “L Comb” and “R Comb” to aid in Comb
installation.
7. To change Blades, follow “Assembly
Instructions” as outlined.
Housing
Thumbscrews (2)
Figure C
Combs
Gears
NOTE: Periodically the gears on the
Blades need to be tightened. Use the
Allen Wrench to tighten the screw on the
gears.