User Manual

ASSEMBLY INSTRUCTION

E985-04 CLIPPED CORNER END TABLE

A B C D

Tray

2PCS 4PCS 24PCS 1PC

Bolt

1/4”x1/2”xØ13

Allen Wrench

4MM

Side Frame

This page lists all the contents included in the box.

Please take the time to identify the hardware as

well as the individual components to this product.

As you unpack and prepare for assembly, place

the contents on a carpeted or padded area to

protect them from damage.

PAGE 1
ASSEMBLY INSTRUCTION E985-04 CLIPPED CORNER END TABLE A Tray 2PCS B C Side Frame 4PCS Bolt 1/4”x1/2”xØ13 24PCS D Allen Wrench 4MM 1PC This page lists all the contents included in the box. Please take the time to identify the hardware as well as the individual components to this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage.
PAGE 2
***Do not tighten screws & bolts until the entire unit is completely assembled. 1 Assemble the Tray (A) to the Side Frame (B), then using the Bolt (C) by Allen Wrench (D). A B B B A B C D C X8 C Cleaning & Care Treat surface with care. Surface is resistant to scratches but is not scratch resistant. Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. Hardware may loosen over time. Periodically check that all connections are tight.