User Manual

2
1
Assemble the Front Leg (B) & Back Leg (C) to the Chair Body (A) with Flat Washer
(D) properly.
Stand chair up on an
even surface and check
that it is balanced. If
there is a slight wobble,
apply downward
pressure in the corner
where a leg is uneven.
Keeping pressure in
that corner, tighten all
bolts. If balanced, apply
downward pressure
evenly in the center and
tighten all bolts.
Do not over-tighten
beyond hole depth.
Helpful Tip:
-Instead of applying
downward pressure while
reaching under to tighten
bolts, have someone sit in
the chair while you tighten
the bolts.
Cleaning & Care
Treat surface with care. Surface is resistant to scratches but is not scratch resistant.
Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. Hardware
may loosen over time. Periodically check that all connections are tight.
B
C
A
D
C
B