User Manual

ASSEMBLY INSTRUCTION

E479 TUFTED BACK CHAIR

B D

F H

1pc 1pc 8pcs

8pcs

Chair Back Seat

Lock Washer

Ø5/16"x13mm

Front Leg

2pcs

Flat Washer

Ø5/16"x19mm

This page lists all the contents included in

the box. Please take the time to identify

the hardware as well as the individual

components to this product. As you

unpack and prepare for assembly, place

the contents on a carpeted or padded

area to protect them from damage.

2pcs 6pcs

Allen Key

1pc

Bolt

Ø5/16"x2"

Bolt

Ø5/16"x2-1/4"

PAGE 1
ASSEMBLY INSTRUCTION E479 TUFTED BACK CHAIR A Chair Back B Seat C Front Leg D Lock Washer Ø5/16"x13mm 1pc E Flat Washer Ø5/16"x19mm 2pcs G Bolt Ø5/16"x2-1/4" 8pcs H Allen Key M5 8pcs 1pc F Bolt Ø5/16"x2" 2pcs 6pcs 1pc This page lists all the contents included in the box. Please take the time to identify the hardware as well as the individual components to this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage.
PAGE 2
1 Put the Seat (B) on a smooth flat surface, attach Front Leg (C) to the Seat (B) using Bolt (H), Lock Washer (D) and Flat Washer (E) on both holes of Seat (B) by Allen Key (H). Turn the Allen Key (H) in Bolt (G). But not too tight. D H G E C B Take the Allen Key, and turn the bolts until the legs are secure. DO NOT TIGHTEN COMPLETELY. Stop when you feel you are adding force to tighten the bolt.
PAGE 3
Continue to tighten using Bolt (G), Lock Washer (D), Flat Washer (E) in both holes of Seat (B) and Chair Back (A). Turn the Allen Key (H) in Bolt (G). Stand chair up on an even surface and check that it is balanced. If there is a slight wobble, apply downward pressure in the corner where a leg is uneven. Keeping pressure in that corner, tighten all bolts. If balanced, apply downward pressure evenly in the center and tighten all bolts. Do not over-tighten beyond hole depth.