User Manual

This page lists all the contents included in the

box. Please take the time to identify the

hardware as well as the individual components

to this product. As you unpack and prepare for

assembly, place the contents on a carpeted or

padded area to protect them from damage.

ASSEMBLY INSTRUCTION

E444-9 CHEST

LegChest Body

A B C D

1pc

4pcs

8pcs

1pc 1set

Anti-Tipping

Lock Washer

Ø1/4"x10mm

Bolt

Ø1/4"x44mm

Flat Washer

Ø1/4"x16mm

Allen Key

E F G

PAGE 1
ASSEMBLY INSTRUCTION E444-9 CHEST A Chest Body E 1pc Flat Washer Ø1/4"x16mm 8pcs B Leg F 4pcs Allen Key M4 C G 1pc Bolt Ø1/4"x44mm 8pcs Anti-Tipping D Lock Washer Ø1/4"x10mm 8pcs 1set This page lists all the contents included in the box. Please take the time to identify the hardware as well as the individual components to this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage.
PAGE 2
1 Take off the Leg from Chest Body (A). Leg 2 Attach Leg (B) to the Chest Body (A) using Bolt (C), Lock Washer (D), Flat Washer (E) by Allen Key (F). Turn the Allen Key (F) in the Bolt (C).
PAGE 3
Unscrew and take off knobs from back sides of drawers, then install the knobs to the front side of drawers. UNSCREW SCREW 4 Remark: There is a tip restraint kit provided on the back of this product. Please refer carefully to the instruction on the tip restraint kit and following instruction picture for installation. G A Anti-Tipping Wall Cleaning & Care Treat surface with care. Surface is resistant to scratches but is not scratch resistant. Clean surfaces with a dry or damp soft cloth.