User Manual

Cleaning & Care
Treat surface with care. Surface is resistant to scratches but is not scratch resistant.
Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. Hardware
may loosen over time. Periodically check that all connections are tight.
11
Put the Sucking Disc (Y) to Metal Frame (C), then put Top Glass (A) & Bottom
Glass (B) onto Metal Frame (C) with Sucking Disc (Y).
8
12
Attach the assembled drawer to Middle Panel - L / R (F) by using Slide Rail (O).
Move slide ball spacers to front. Hold drawer horizontally, and slide runners into
ball spacers.
Y
16pcs
C
A
B
C
B
Y
O-1
O-2
F
F
Drawer
Remark: If there is any gap
between the legs and ground,
please adjust the leveler until it
reaches the ground.