User Manual

Attach Upper Leg Frame (C) to Chair Seat (A) using Bolt (D), Spring Washer (E), Flat

Washer (F) with Allen Key (G).

Note: At this stage, do not fully tighten the Bolts.

Attach Lower Leg Frame (B) to Upper Leg Frame (C) using Bolt (D), Spring Washer (E),

Flat Washer (F) with Allen Key (G).

Note: At this stage, tighten all Bolts at all joints fully in a sequential manner.

Adjust Pre-installed Levelers

height to achieve balance

Treat surface with care. Surface is resistant to scratches but is not scratch resistant. Clean

surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. Hardware may loosen over

time. Periodically check that all connections are tight.

Cleaning & Care

Adjust the pre-installed levelers at the bottom of Lower Leg Frame (B) and Upper Leg

Frame (C) until the Dining Chair is level with the ground.