User Manual

ASSEMBLY INSTRUCTION

This page lists all the contents included in the box.

Please take the time to identify the hardware as

well as the individual components to this product.

As you unpack and prepare for assembly, place the

contents on a carpeted or padded area to protect

them from damage.

Allen Key

M4 x 110mm

JCBC Bolt

M6 x 100mm

JCBC Bolt

M6 x 50mm

U Washer

CSK Screw

M4 x 32mm

Backrest

Cushion Seat Side Rail R / L

Front Leg

1 pc

2 pcs

4 pcs

6 pcs

4 pcs

1 pc1 pc 2 pcs 1 pc

601C2 DINING CHAIR

PAGE 1
ASSEMBLY INSTRUCTION 601C2 DINING CHAIR Backrest Cushion Seat Side Rail R / L Front Leg 1 pc 1 pc 2 pcs 1 pc JCBC Bolt M6 x 100mm JCBC Bolt M6 x 50mm U Washer M6 CSK Screw M4 x 32mm 4 pcs 2 pcs 6 pcs 4 pcs Allen Key M4 x 110mm 1 pc This page lists all the contents included in the box. Please take the time to identify the hardware as well as the individual components to this product.
PAGE 2
Install both sides of Side Rail (C) with Backrest (A) by using U Washer (G) and JCBC Bolt (E). Use Allen Key (I) to tighten the hardware but please do not over tighten the bolts in this step. I E G C - Left C - Right A A Take the Allen Wrench, and turn the bolts until the legs are secured. DO NOT TIGHTEN COMPLETELY. Stop when you feel you are adding force to tighten the bolt.
PAGE 3
Install previous assembly with Front Leg (D) by using U Washer (G) and JCBC Bolt (F). Use Allen Key (I) to tighten the hardware but please do not over tighten the bolts in the step.
PAGE 4
Install last part of Cushion Seat (B) by using CSK Screw (H) as shown below. Tighten all sections from previous steps by using Screwdriver (not included). H C / D Helpful Tip: -Instead of applying downward pressuere while reaching under to tighten bolts, have someone sit in the chair while you tighten the bolts. B Stand the chair up on even surface and check that it is balanced. If there is a slight wobble, apply downward pressure in the corner where a leg is uneven.