ASSEMBLY INSTRUCTION COUNTER HEIGHT CHAIR Chair Back [E] Chair Se cat [Allegra Right Leg 1pc 1pc 1pc 1pc [ Front Stretcher | Leif Stretcher Right Stretcher ] Lock Washer 1pc scalp Delphic Biopics Flat Washer Bolt Bolt Bolt 1/4" 10 pes 2 pes 4 pcs 4 pcs £ Wood Screw EJ Allen Wrench 4mm e 7 6 pcs 1pc This page lists all the contents included in the box. Please take the time to identify the hardware as well as the individual components to this product.
Place the Chair Back (A) on the smooth carpeted surface. Attach the Chair Seat (B) to Chair Back (A) by Bolt (L), Bolt (J), Lock Washer (H), Flat Washer (I) with Allen Wrench (N). Left Stretcher (F) & Right Stretcher (G). (2) Attach Front Stretcher (E) to Left Leg (C) & Right Leg (D). (3) Attach Left Leg (C) & Right Leg (D) to Chair Seat (B), secure with Bolt (K), Lock Washer Flat Washer () and tighten with Allen Wrench (N).
a Assembly is completed. Stand chair up on an even surface and check that it is balanced. If there is a slight wobble, apply downward pressure in the corner where a leg is uneven. Keeping pressure in that corner, tighten all Bolts. If balanced, apply downward pressure evenly in the center and tighten all Bolts. Do not over-tighten beyond hole depth. Helpful Tip: -Instead of applying downward pressure while reaching under to tighten bolts, have someone sit on the chair while you tighten the Bolts.
