ASSEMBLY INSTRUCTION COUNTER HEIGHT TABLE Table Top [EJ Table Storage [ Table Shelf [Left Front Leg Panel 1pc 1pc PCs 1pe [Right Front Leg [ Blackleg [EJRightBackLeg |]Long Stretcher 1pc 1pc 1pc 1pc [l Short Stretcher [ Lock Washer [ Flat Washer M Lott 1/4" 1/4" 1pc 8 pcs 8 pcs 8 pcs [ Lock Washer [Flatlet Washer Bottle [ Shelf Bracket 5/16" 5/16" pcs 8 pcs 8 pes 12 pes [Heywood Screw [ Wood Screw [EX Allen Wrench 4mm pes 4 pcs 1pc This page lists all the contents included in the box.
n Place Table Storage Panel (B) on a pike of cloth to prevent finish from scratching and open. Place Table Top (A) on a piece of cloth to prevent finish from scratching. Attach Left Front Leg (D) & Right Front Leg (E) to the comer block of Table Top (A) and secure with Flat Washer (N), Lock Wagner (M), Bolt (O) and tighten with Allen Wrench (8).
Insert Table Storage Panel (B) on to Left Front Leg (D) & Right Front Leg (E) and secure with Flat Washer (K), Lock Washer Bolt (L) and tighten with Allen Wrench (S). Insert Shelf Bracket (P) to the holes on Table Storage Pan cl (B). Place Table Shelf (C) on to the Shelf Bracket (P) and secure it with Wood Screw (Q) using Philips Head Screwdriver (not provide).
Attach Left Back Leg (F) and Right Back Leg (G) to the corner block of Table Top (A), secure with Flat Washer (N), Lock Washer (M), Bolt (O} and tighten it with Allen Wrench (S). Attach Long Stretcher (H) to Table Storage Pan cl (B) and Short Stretcher (I), and attach Short Stretcher (I) to Left Back Leg (F), Right Back Leg (G), then insert Wood Resew (R) to the holes at Stretcher (H & I) and tighten all screws using Philips Head Screwdriver (not provide). Cleaning & Care Treat surface with care.
