User Manual

Cleaning & Care

Treat surface with care. Surface is resistant to scratches but is not scratch resistant. Clean surface with a dry or damp

soft cloth. Do not use abrasive cleaners. Hardware may loosen over time. Periodically check that all connections are tight.

Attach Wooden Seat (C) and Box Frame (B) with CBS Screw (M) by using Screwdriver (not included).

Tighten all screws in this step.

Helpful Tip: Instead of applying downward pressure while reaching under to tighten bolts, have someone sit in the

chair while you tighten the bolts.

Turn the assembled chair to the upright position carefully. Make sure the chair is level, and then securely

tighten all bolts at this stage. Assembly is now completed.

Stand chair up on an even surface and check that it

is balanced. If there is a slight wobble, apply downward

pressure in the corner where a leg is uneven.

Keeping pressure in that corner, tighten all bolts.

If balanced, apply downward pressure

evenly in the center and tighten all bolts.

Do not over-tighten beyond hole depth.