User Manual

Apply some Glue (K) to the holes of the Chair Back (A) and insert Side Stretcher (Long) (E) into the holes of

Chair Back (A) with CBS Screw (N) by using Screwdriver (not included). Do not fully tighten all screws

in this step.

Put the Chair Back (A) and Box Frame (B) upside down on the soft and smooth surface. With assistance,

attach Box Frame (B) onto Chair Back (A).Then insert Jcbc Bolt (G), Spring Washer (I) and Flat Washer (J)

into pre-drilled holes of each corner by using Allen Key (L). Finally, insert Jcbc Bolt (H), Spring Washer (I) and

Flat Washer (J) into the pre-drilled holes of the middle of Chair Back (A), by using Allen Key (L). Do not

fully tighten the bolts in this step.

Take the Allen Key, and turn the bolts until the legs are secured.

DO NOT TIGHTEN COMPLETELY.

Stop when you feel you are adding force to tighten the bolt.