ASSEMBLY INSTRUCTION 530C3-24 DOUBLE X-BACK 24"H COUNTER HEIGHT CHAIR air Baal ox Frame ‘wooden Seat rot Leg (Left-Right, [ Chair Back Box F [ wooden s Front Leg (Left-Right) 1pe 1pe ipe PCs Side Stretcher (Long) Front Stretcher (Short) Hebe Brit Jove Bolt {Left-Right) M8 x 70mm M6 x 40mm PCs 1pc apes apes Lock Washer Lariat Washer [ Cs-Cb Screw [l Pan Head Screw 112 & D (s PCs PCs PCs apes Mailmen Key M Glue M4 x 60mm 1pc 1pe This page lists all the contents included in the box.
1 Put the Chair Back (A), Box Frame {B) upside down on the soft and smooth surface With assistance attach Box Frame (B} onto Chair Back {A). Then insert Hebe Brit (G), Lock Washer (1) and Flat Washer (J) into prevailed holes of each corner by using Allen Key (M). Insert Hebe Bolt (H), Lock Washer (I} and Flat Washer (J} into the per-drilled holes of the middle of Chair Back {A) by using Allen Key (M). Do not fully tighten the bolts in this step.
Almach Front Leg (D) assembly to comber of Box Frame (B) along inserting the Front Stretcher {F) onto each heel on Front Leg (D) with applying some Glue (N}, then insert Hebe Bolt (G), Lock Washer (1) and Flat Washer {J) using Allen Key (M). Insert Pan Head Screw (L} into the holes of Front Leg (D) and Stretcher (F) by using screw driver (not included).
Attach Wooden Seat (C) and Box Frame (B) with Cs-Cb Screw (K) by using Screwdriver {not included). Tighten all screws in this step. Turn the assembled chair 1o the upright position carefully. Make sure the chair is level,and then securely tighten all bolts at this stage. Assembly is now completed. Stand chair up on an even surface and check that iris balanced. if there Is a slight wobble, apply downward pressure in the corner where a leg is uneven. Keeping pressure in that comer, tighten all bolts.
