User Manual

Attach Wooden Seat (C) and Box Frame (B) with CBS Screw (K) by using Screwdriver
(not included).Tighten all wood screws in this step.
Helpful Tip:-Instead of applying downward pressure while reaching under to tighten bolts,have
someone sit in the chair while you tighten the bolts.
Turn the assembled chair to the upright position carefully.Make sure the chair is level,and then
securely tighten all bolts at this stage.Assembly is now completed.
Stand chair up on an even surface and check
that it is balanced. If there is a slight wobble,
apply downward pressure in the corner where a
leg is uneven. Keeping pressure in that corner,
tighten all bolts. If balanced, apply downward
pressure evenly in the center and tighten all
bolts. Do not over-tighten beyond hole depth.