User Manual

Apply some Glue (M) to the holes of the Chair Back (A) and Insert Stretcher (E) into the holes of Chair Back (A)
with CBS Screw (K) by using Screwdriver (not included). Do not fully tighten all screws in this step.
Put the Chair Back (A) Box Frame (B) upside down on the soft and smooth surface.With assistance
attach Box Frame (B) onto Chair Back (A).Then insert Jcbc Bolt (F),Spring Washer (H) and Flat Washer (I)
into predrilled holes of each corner, by using Allen Key (L).Insert Jcbc Bolt (G),Spring Washer (H) and
Flat Washer (I) into the predrilled holes of the middle of Chair Back (A),by using Allen Key (L).Do not
fully tighten the bolts in this step.
Take the Allen Key, and turn the bolts until the legs are secure.
DO NOT TIGHTEN COMPLETELY.
Stop when you feel you are adding force to tighten the bolt.