User Manual

This page lists all the contents included in the box.

Please take the time to identify the hardware as

well as the individual components to this product.

As you unpack and prepare for assembly, place

the contents on a carpeted or padded area to

protect them from damage.

ASSEMBLY INSTRUCTION

Bolt

5/16"×2"

7 pcs

5 pcs

4 pcs

1 pc

2 pcs

4 pcs

8 pcs

1 pc

Allen Wrench

1/6"

1 pc

Lock Washer

5/16"

Flat Washer

5/16"

Bolt

1/4"×1-1/2"

Lock Washer

1/4"

Flat Washer

1/4"

2 pcs

Wood Cap

Chair Back

Seat Front Leg

Left/Right Arm

Bolt

5/16"×3"

174A ARM CHAIR

PAGE 1
ASSEMBLY INSTRUCTION 174A ARM CHAIR Chair Back Seat Front Leg Left/Right Arm 1 pc Bolt 1/4"×1-1/2" 1 pc Lock Washer 1/4" 2 pcs Flat Washer 1/4" 2 pcs Bolt 5/16"×2" 7 pcs Bolt 5/16"×3" 5 pcs Lock Washer 5/16" 5 pcs Flat Washer 5/16" 4 pcs Allen Wrench 1/6" 4 pcs Wood Cap 8 pcs 8 pcs 1 pc 2 pcs This page lists all the contents included in the box. Please take the time to identify the hardware as well as the individual components to this product.
PAGE 2
Place the Seat (B) upside down on the smooth carpet surface. Attach the Front Leg (C) to Seat (B) by Bolt (H), Lock Washer (J) and Flat Washer (K) with Allen Wrench (L). Take the Allen Wrench, and turn the bolts until the legs are secured. DO NOT TIGHTEN COMPLETELY. Stop when you feel you are adding force to tighten the bolt. L H C K J B Place the Chair Back (A) with Seat (B) on the smooth carpet surface.
PAGE 3
Attach the Left/Right Arm (D) to the Seat Frame (B) by Bolt (E), Lock Washer (F) and Flat Washer (G) with Allen Wrench (L). Turn the Bolt (E) with Allen Wrench (L) until the arms are secured. After that, use the Wood Cap (M) to cover the bolt hole. Stand chair up on an even surface and check that it is balanced. If there is a slight wobble, apply downward pressure in the corner where a leg is uneven. Keeping pressure in that corner, tighten all bolts.