ASSEMBLY INSTRUCTION CONVERTIBLE TABLE LY Table Top [E] Table Leg [A Lower Foot IE] Table Stretcher 1pc 4 pcs 2 pcs 1pc [H Support Rod [ Brit ] Lott ] Brit e M 2 pos 4 pcs 8 pcs 4 cops Il Lock Washer ] Flat Washer [{ Dowel M Double Nut 5/16" 5/16" (= T O 1pc 1pc 4 pcs 1pc [ Nut Stopper E Nut &1 Wrench I Allen Wrench 5/16” 5/16" a4 spec 1pc 1pc 1pc This page lists all the contents included in the box. Please take the time to identify the hardware as well as the individual components to this product.
Put Table Leg (B) then Flat Washer (J), Lock Washer (1), Bolt (G) and tighten with Allen Wrench (P). Put Support Rod (E) then use Flat Washer (J), Lock Washer (1), Bolt (F) and tighten with Allen Wrench (P). Attach Lower Foot (C) to Table Stretcher (D}, using Double Nut (L), Nut Stopper (M), Nut (N) and Wrench (O).
Use Flat Washer (J), Lock Washer (1), Bolt (H) and Allen Wrench(P) to tighten at underneath lower foot. After that, use Flat Washer (J), Lock Washer (l), Bolt (F) and Allen Wrench (P) fo tighten the Support Rod (E). Assembly is completed.
E Pull Existing Support Rail for the bigger size table top. siting Support Rail Cleaning & Care Treat surface with care. Surface is resistant to screeches but is not scratch resistant. Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. Hardware may loosen over time. Periodically check that all connections are tight.
