Manualshelf

User Manual

ManualsBrandsWeston Home ManualsWeston Home FurnitureBluff Round Metal Nesting Coffee Table Set with Grey Oak Finish Tops, Set of Two
123
E
H
I
Attach Small Table Leg Support (E) to Small Table Leg (F) using Bolt (H) with Allen Key (I).
Adjust the Pre-installed Levelers at the Large Table Leg Support (B) and Small Table
Leg Support (E) until the Nesting Table is level with the ground.
Treat surface with care. Surface is resistant to scratches but is not scratch resistant. Clean
surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. Hardware may loosen over
time. Periodically check that all connections are tight.
Cleaning & Care
3
Adjust Pre-installed Levelers
height to achieve balance.
F
Note: At this stage, tighten all Bolts at all joints fully in a sequential manner.
B
E