User Manual

ASSEMBLY INSTRUCTION

089-04 ROUND END TABLE

1 PC

Bolt

6 PCS

1/4"*5/8"

3 PCS

1 PC 3 PCS

This page lists all the contents included in

the box. Please take the time to identify

the hardware as well as the individual

components to this product. As you

unpack and prepare for assembly, place

the contents on a carpeted or padded

area to protect them from damage.

Table Top Bottom Frame

Leg Support

Bolt

1/4"*1-1/4"

Allen Key

1 PC

PAGE 1
ASSEMBLY INSTRUCTION 089-04 ROUND END TABLE Table Top Bottom Frame Leg Support 1 PC 1 PC 3 PCS Bolt Bolt Allen Key 1/4"*5/8" 1/4"*1-1/4" M4 6 PCS 3 PCS 1 PC This page lists all the contents included in the box. Please take the time to identify the hardware as well as the individual components to this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage.
PAGE 2
Attach Leg Support (C) to Table Top (A) using Bolt (D) with Allen Key (F). Note: At this stage, do not fully tighten the Bolts. C F D A Attach Bottom Frame (B) to Leg Support (C) using Bolt (E) with Allen Key (F). Note: At this stage, tighten all Bolts at all joints fully in a sequential manner. B F E C A Adjust the Pre-installed Levelers at the Bottom Frame (B) until the End Table is level with the ground. Adjust Pre-installed Levelers height to achieve balance.