ASSEMBLY INSTRUCTION ROUND DINING TABLE TABLE TOP TEI MOUNTING PLATE PEDESTAL COLUMN DI PEDESTAL LEG — @B e 1PC 1PC 1pPC 4 PCS B ATTN WRENCH CBC M6 x Sammy SPRING WASHER M6 HABITAT WASHER 1pC 6 PCS 6 PCS 6 PCS ¥ WRENCH Bmm HEX NUT 5/16" SPRING WASHER M8 FLAT WASHER M3 1PC 12 PCS 12 PCS 12 PCS T REVELER 4 PCS This Page lists all the contents included in the box . Please take the time to identify the hardware as well as the individual components to this product .
Align and fasten mounting plate(B) to pedestal column(C) using hex nut(J), big spring washer(K) and big flat washer(L) and tighten with wrench(I). Place table top upside down on soft surface. Align and fasten mounting plate(B) to table top(A) using bolt(F), small spring washer(G) and small flat washer(H) and tighten with Allen wrench(E). ** Do not fully tighten the nut or bolt until all nuts and bolts are attached.
Screw in the leveler(M) to the bottom of pedestal leg(D). Align and fasten pedestal leg(D) to pedestal column(C) using hex nut(J), big spring washer(K), and big washer(L) and tighten with wrench(l). Stand table up on an even surface and check that it is balanced. If there is a slight wobble, please adjust the leveler. Cleaning & Care Treat Surface with care. Surface is resistant to scratches but is not scratch resistant. Clean surface with a dry or damp soft cloth. Do not use abrasive cleaners .
