Specifications

10/31/02 Tech-304/DWO 14195 Page 8 of 39
Section 3 Initial Setup
3.1 Mounting Positioner on a Rotary Actuator
Accessory Mounting
Actuator
Shaft
Flat Head Screw
Actuator
Coupler
Inner Beacon
Set Screw
Bracket
ICoT
Step 1. Mount bracket and inner beacon coupler to actuator. If actuator shaft has a tapped
hole, fasten using proper flat head screw. If actuator does not have a tapped hole, fasten
using set screws on side of coupler. (See Figure 3-1)
Figure 3-1