Specifications

10/31/02 Tech-304/DWO 14195 Page 18 of 39
3.7 Setting of switches on a rotary ICoT
1. Operate the actuator to the desired
extreme.
2. Loosen magnetic trigger bolt #1.
(See Figure 3-12)
3. Slide trigger bolt #1 beneath the first
switch and tighten with wrench.
4. Operate the actuator to the opposite
extreme.
5. Loosen magnetic trigger bolt #2.
6. Slide trigger bolt #2 beneath the second
switch and tighten with wrench.
CLOSED
OPEN
CLOSED
OPEN
Magnetic Trigger
Bolt #2
Position Feedback Monitor
(Inner Beacon)
Magnetic Trigger
Bolt #1
Figure 3-12