Specifications

10/31/02 Tech-304/DWO 14195 Page 14 of 39
Note: For Fisher actuators model 657 & 667 sizes 34 thru 70, Westlock Controls supplies a
slotted mounting kit design, to ease the mounting process. This will allow the user to easily
center the positioner sensor between the limits of the magnet assembly’s stroke.
Figure 3-7
Actuator
Mounting Bracket
Position Sensor
Conduit Entry
3.4 Mounting Remote Positioner on a Linear Actuator
(Models 4215 & 4315)
Step 1. Mount the magnet assembly and bracket to the actuator as described in Section 3.3 Step 1.
Step 2. Mount the position sensor housing so that the conduit entry faces away from the dia-
phragm or cylinder. (See Figure 3-7)