Specifications

WESTLOCK CONTROLS CORPORATION
280 MIDLAND AVENUE, SADDLE BROOK, NJ 07663 TEL: [phone] FAX: [phone]
www.westlockcontrols.com
1/12/10 TECH-439/D.W.O. 19024 Page 19 of 58
3.4 Mounting Remote Positioner on a Linear Actuator
(Models 5215 &
5315)
Step 1. Mount the magnet assembly and bracket to the actuator as described in Section
3.3 Step 1.
Step 2. Mount the position sensor housing so that the conduit entry faces away from the
diaphragm or cylinder. (See Figure 3-9)
Figure 3-9
Note: For Fisher actuators model 657 & 667 sizes 34 thru 70, Westlock Controls
supplies a slotted mounting kit design, to ease the mounting process. This will allow the
user to easily center the positioner sensor between the limits of the magnet assembly’s
stroke. Other mounting kits are available upon request