Specifications

WESTLOCK CONTROLS CORPORATION
280 MIDLAND AVENUE, SADDLE BROOK, NJ 07663 TEL: [phone] FAX: [phone]
www.westlockcontrols.com
1/12/10 TECH-439/D.W.O. 19024 Page 11 of 58
3 Initial Setup
3.1 Mounting Positioner on a Rotary Actuator
Step 1. Mount bracket and inner beacon coupler to actuator. If actuator shaft has a
tapped hole, fasten using proper flat head screw. If actuator does not have a tapped
hole, fasten using set screws on side of coupler. (See Figure 3-1)
Figure 3-1